Gereral Introduction of Booster

1.What is the booster?
Cell phone signal booster(also named repeater, amplifier) is a product designed to solve the mobile phone blind signal. As the mobile phone signal is transmitted by electromagnetic waves to establish a communications link, however there are a lot barriers make it is unavailable to get sound signal. When people enter some tall buildings, some places basement malls, restaurants and parking lot, some places of enteretainment such as karaoke sauna and massage, some public place such as subway, tunnel and etc. Where cell phone signals can not reach, now the cell phone signal booster can solve these problems! The entire range of mobile phone signals can be well used; We all will get great convenience and benefit from sound signal.
Our boosters are the perfect solutions for a wireless improvement in the mobile reception!
2.Why need a signal booster?
Will you customers stay comfortable when there is no smooth communication in your shops,restaurants, hotels or clubs?
Will that be frustrating if your clients could not call you through due to weak signals in offices?
Will your life be inflenced if your mobile is always"out-of-service" at home when your friends call you?
3.How to Choose a Suitable Booster?
1>What frequency does your operator(s) support?-(One or multiple)
2>How is the soignal outside?
3>How large an area do you need a quality signal in your building?(It is greatly related to the accessories allocation)

Installation for Mobile Phone CDMA 980 Signal Booster RF repeater 850mhz:

Step 1 Start by taking your phone up to the roof or other location outside to find where the signal is strongest.

Step 2 Temporarily mount the Outdoor (outside) antenna in that location. You may need to adjust and move the antenna later.

Step 3 Run coaxial cable into the building to a convenient loaction (attic, etc.) where you can also get standard power for the Signal Repeater.

Step 4 Place the Signal Repeater in that location and connect the coaxial cable to the Outdoor Side of the Signal Repeater and the Outdoor antenna.

Step 5 Mount your Indoor (inside) antenna in a productive location. You may need to adjust or move the antenna later. More notes on Indoor antennas and patterns here.

Step 6 Connect coaxial cable between the Indoor antenna and the Signal Repeater output port.

Step 7 Power up the system and check for signal inside the building. If needed, tune system by moving and or pointing the Outdoor and Indoor antennas until they get the most signal possible.

Step 8 Secure all antennas and cables, securely mount the Signal repeater and clean up the installation.

Of course there are still a few more things to consider but in general, this is the basic procedure. For more information, please contact us.

The repeater makes the signal stronger in places with poor signal coverage such as:

1) Underground areas: basements, parking lots, tunnels;

2) Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels;

• *Model : KT--7027S-D0911L90
  *Product Category : 698-2700MHz Directional Panel Antenna 90degree 11dBi High Gain CDMA/GSM/PCS/3G/WLAN/LTE 4G Antenna

  

• *Model : KT-9102A-B-C
  *Product Category : 17-24dbm gsm 900mhz telecom mobile signal indoor booster

  

• *Model : KT-RS900/1800-B25/25-P37B
  *Product Category : 5W GSM900MHz wireless mobile phone signal Frequency Shifting Repeater

  

• *Model :
  *Product Category : Product 10