43dbm 20W TETRA 400 RF band selective mobile signal repeater -Tetra 400Mhz Repeater

43dbm 20W TETRA 400 RF band selective mobile signal repeater

PRODUCT NAME :	43dbm 20W TETRA 400 RF band selective mobile signal repeater
MODEL :	KT-CRP-B5-P43-B
PRODUCT CATEGORY :	Tetra 400Mhz Repeater
POWER SUPPLY :	AC 110V、AC 220V、DC -48V
FREQUENCY :	885-909MHz/930-960MHz、806 – 821MHz/851 - 866MHz
SCENARIOS :	Stadium、Office、Highway、Railway、Scenic、Pier、Island、Offshore、Urban road、Supermarket 、Metro、Rural、Suburban、Hospital、Campus、Mine、Oilfield、Tunnel
COVERAGE :	1-3km、3-5km、>10km

Introduction
Mainfeature
Application&scenarios
Specification
Parts/Warranty

400M 20W Band Selective Repeaters（KT-CRP-B5-P43-B)
Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Main Features of kingtone cellular repeater
◇ High linearity PA; High system gain；
◇ Intelligent ALC technology；
◇ Full duplex and high isolation from uplink to downlink；
◇ Automatic Operation convenient operation；
◇ Integrated technique with reliable performance;
◇ Bandwidth can be configured from 5-25MHz in work band.
◇ Local and remote monitoring (optional) with automatic fault alarm &remote control;
◇ Weatherproof design for all-weather installation;

Items		Testing Condition	Specification
			Uplink	Downlink
Working Frequency(MHz)		Nominal Frequency	410 – 415MHz	420 - 425MHz
Gain(dB)		Nominal Output Power-5dB	80±3
Output Power (dBm)			37	43
ALC (dBm)		Input Signal add 20dB	△Po≤±1
Noise Figure (dB)		Working in-band（Max. Gain）	≤6
Ripple in-band (dB)		Nominal Output Power -5dB	≤4.0
Time Delay (us)		Working in-band	≤5
Gain Adjustment Step (dB)		Nominal Output Power -5dB	1dB
Gain Adjustment Range(dB)		Nominal Output Power -5dB	≥30
Gain Adjustable Linear(dB)	10dB	Nominal Output Power -5dB	±1.0
	20dB	Nominal Output Power -5dB	±1.0
	30dB	Nominal Output Power -5dB	±1.5
Out of Band Gain	±400KHz	Nominal Output Power -5dB	≤50
	±600KHz	Nominal Output Power -5dB	≤40
	±1MHz	Nominal Output Power -5dB	≤35
	±5MHz	Nominal Output Power -5dB	≤25
Inter-modulation Attenuation (dBc)		Working in-band	≤-45
Spurious Emission(dBm)	9kHz-1GHz	BW:30KHz	≤-36	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
VSWR		BS/MS Port	1.5
I/O Port		N-Female
Impedance		50ohm
Operating Temperature		-25°C ~+55°C
Relative Humidity		Max. 95%
MTBF		Min. 100000 hours
Power Supply		DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function		Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module		RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

1 year for equipment ,6 months for accessories .


E-mail:
Products:	UHF Tetra 400MHz Repeater Fiber Optic Signal Amplifier BDA widely used in trunking communication systems
Subject:
Message:
Quantity needed:
Verification: