| PRODUCT NAME : | 33dbm LTE Band VII 2W Band Selective RF Repeater |
| MODEL : | KT-LRP-B70-P33-VII |
| PRODUCT CATEGORY : | 4G LTE 2600mhz repeater |
| POWER SUPPLY : | AC 110V、AC 220V、DC -48V |
| FREQUENCY : | 890-915MHz/935-960MHz、1710-1785MHz/1805-1880MHz、1850-1910MHz/1930-1990MHz、1920-1980MHz/2110~2170MHz |
| SCENARIOS : | Office、Highway、Railway、Scenic、Island、Hospital、Campus |
| COVERAGE : | 5000sqm、1-3km、1-5KM、5000-50000sqm |
LTE Band VII 2W Band Selective Repeaters（KT-LRP-B70-P33-VII）
Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
Technical Specifications
| Items | Testing Condition | Specification | MEMO | |||
| Uplink | Downlink | |||||
| Working Frequency(MHz) | Nominal Frequency | 2500 – 2570 MHz | 2620 – 2690 MHz | LTE | ||
| Gain(dB) | Nominal Output Power-5dB | 90±3 |
| |||
| Output Power (dBm) | GSM modulating signal | 30 | 33 |
| ||
| ALC (dBm) | Input Signal add 20dB | △Po≤±1 |
| |||
| Noise Figure (dB) | Working in-band（Max. Gain） | ≤5 |
| |||
| Ripple in-band (dB) | Nominal Output Power -5dB | ≤3 |
| |||
| Frequency Tolerance (ppm) | Nominal Output Power | ≤0.05 |
| |||
| Time Delay (us) | Working in-band | ≤5 |
| |||
| ACLR | Working in-band | Compatible with 3GPP TS 36.143 and 3GPP TS 36.106 | For LTE, PAR=8 | |||
| Spectrum Mask | Working in-band | Compatible with 3GPP TS 36.143 and 3GPP TS 36.106 | For LTE, PAR=8 | |||
| Gain Adjustment Step (dB) | Nominal Output Power -5dB | 1dB |
| |||
| Gain Adjustment Range(dB) | Nominal Output Power -5dB | ≥30 |
| |||
| Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 |
| ||
| 20dB | Nominal Output Power -5dB | ±1.0 |
| |||
| 30dB | Nominal Output Power -5dB | ±1.5 |
| |||
| Spurious Emission(dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 |
| |
|
|
|
|
|
| ||
| 1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 |
| ||
| VSWR | BS/MS Port | 1.5 |
| |||
| I/O Port | N-Female |
| ||||
| Impedance | 50ohm |
| ||||
| Operating Temperature | -25°C ~+55°C |
| ||||
| Relative Humidity | Max. 95% |
| ||||
| MTBF | Min. 100000 hours |
| ||||
| Power Supply | DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%) |
| ||||
| Remote Monitoring Function | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power |
| ||||
| Remote Control Module | RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery |
| ||||
