| PRODUCT NAME : | 37dbm 5Watt 4G LTE Band Selective wide band Repeater |
| MODEL : | KT-LRP-B70-P37-VII |
| PRODUCT CATEGORY : | 4G LTE 2600mhz repeater |
| POWER SUPPLY : | AC 110V、AC 220V、DC -48V |
| FREQUENCY : | 2500-2570MHz/2620-2690MHz |
| SCENARIOS : | Stadium、Office、Railway、Scenic、Pier、Island、Offshore、Urban road、Supermarket 、Metro、Rural、Suburban、Hospital、Campus、Mine、Oilfield、Tunnel |
| COVERAGE : | 5000sqm、1-3km、3-5km、1-5KM、5000-50000sqm |
Technical Specifications
| Items | Testing Condition | Specification | MEMO | |||
| Uplink | Downlink | |||||
| Working Frequency(MHz) | Nominal Frequency | 2500 – 2570 MHz | 2620 – 2690 MHz | LTE | ||
| Gain(dB) | Nominal Output Power-5dB | 90±3 |
| |||
| Output Power (dBm) | GSM modulating signal | 33 | 37 |
| ||
| ALC (dBm) | Input Signal add 20dB | △Po≤±1 |
| |||
| Noise Figure (dB) | Working in-band(Max. Gain) | ≤5 |
| |||
| Ripple in-band (dB) | Nominal Output Power -5dB | ≤3 |
| |||
| Frequency Tolerance (ppm) | Nominal Output Power | ≤0.05 |
| |||
| Time Delay (us) | Working in-band | ≤5 |
| |||
| ACLR | Working in-band | Compatible with 3GPP TS 36.143 and 3GPP TS 36.106 | For LTE, PAR=8 | |||
| Spectrum Mask | Working in-band | Compatible with 3GPP TS 36.143 and 3GPP TS 36.106 | For LTE, PAR=8 | |||
| Gain Adjustment Step (dB) | Nominal Output Power -5dB | 1dB |
| |||
| Gain Adjustment Range(dB) | Nominal Output Power -5dB | ≥30 |
| |||
| Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 |
| ||
| 20dB | Nominal Output Power -5dB | ±1.0 |
| |||
| 30dB | Nominal Output Power -5dB | ±1.5 |
| |||
| Spurious Emission(dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 |
| |
|
|
|
|
|
| ||
| 1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 |
| ||
| VSWR | BS/MS Port | 1.5 |
| |||
| I/O Port | N-Female |
| ||||
| Impedance | 50ohm |
| ||||
| Operating Temperature | -25°C ~+55°C |
| ||||
| Relative Humidity | Max. 95% |
| ||||
| MTBF | Min. 100000 hours |
| ||||
| Power Supply | DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%) |
| ||||
| Remote Monitoring Function | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power |
| ||||
| Remote Control Module | RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery |
| ||||