USER
5Watt 37dbm GSM900&2100 Full Band wireless cell phone Repeater
PRODUCT NAME : 5Watt 37dbm GSM900&2100 Full Band wireless cell phone Repeater
MODEL : KT-G/DRP-B25/75-P37-B
PRODUCT CATEGORY : Dual Band Repeater
POWER SUPPLY : AC 110VAC 220VDC -48V
FREQUENCY : 890-915MHz/935-960MHz1920-1980MHz/2110~2170MHz
SCENARIOS : StadiumOfficeRailwayScenicPierIslandOffshoreUrban roadSupermarket MetroRuralSuburbanHospitalCampusOilfieldTunnel
COVERAGE : 5000sqm1-3km3-5km1-5KM5000-50000sqm
  • Introduction
  • Mainfeature
  • Application&scenarios
  • Specification
  • Parts/Warranty

GSM900&2100 20W Full Band RepeatersKT-G/DRP-B25/75-P43-B

     Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive lowpower signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

  Main Features    

◇ High linearity PA; High system gain;
◇ Intelligent ALC technology;
◇ Full duplex and high isolation from uplink to downlink;
◇ Automatic Operation convenient operation;
◇ Integrated technique with reliable performance;
◇ Bandwidth can be configured from 5-25MHz in work band.
◇ Local and remote monitoring (optional) with automatic fault alarm &remote control;
◇ Weatherproof design for all-weather installation;

Items

Testing Condition

Specification

Uplink

Downlink

Working Frequency(MHz)

Nominal Frequency

890 – 915MHz

935 - 960MHz

1920 – 1980MHz

2110 - 2170MHz

Gain(dB)

Nominal Output Power-5dB

95±3

Output Power (dBm)

GSM modulating signal

33

40

ALC (dBm)

Input Signal add 20dB

Po≤±1

Noise Figure (dB)

Working in-bandMax. Gain

≤5

Ripple in-band (dB)

Nominal Output Power -5dB

≤3

Frequency Tolerance (ppm)

Nominal Output Power

≤0.05

Time Delay (us)

Working in-band

≤5

Peak Phase Error(°)

Working in-band

≤20

RMS Phase Error (°)

Working in-band

≤5

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power -5dB

±1.5

Inter-modulation Attenuation (dBc)

Working in-band

≤-45

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

I/O Port

N-Female

Impedance

50ohm

Operating Temperature

-25°C ~+55°C

Relative Humidity

Max. 95%

MTBF

Min. 100000 hours

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

Remote Monitoring Function(Optional)

Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

Remote Control Module(Optional)

RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

1year warranty for equipment ,6month for accessories
■ contat supplier
E-mail:
Products: UHF Tetra 400MHz Repeater Fiber Optic Signal Amplifier
BDA widely used in trunking communication systems
Subject:
Message:
Quantity needed:
Verification: