10W High Output Power Outdoor/Indoor 3G UMTS/HSDPA WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier -3G UMTS/WCDMA Repeater

10W High Output Power Outdoor/Indoor 3G UMTS/HSDPA WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier consist of Master and Slave. One Master can work together with 1 to 4 Slaves. The Master transfers the BTS signal into optical signal and transmits the optical signal to the Slaves. The Slaves transfer the optical signal into RF signal, amplify the RF signal and cover the target areas. The application of GSM Fiber Optical repeaters will effectively eliminate the signal blind areas, enhance the network quality, improve the image of cellular operators and bring them more profit.

As per the method of receiving BTS signal by the Donor Unit, two types of FOR are available:

Cable-Access FOR: to receive BTS signal via a direct coupler closed to the BTS (recommended)

Wireless-Access FOR: to receive BTS signal via a Donor Antenna (applicable when no fiber optic cable connecting to the BTS); can be sorted into 2 sub-categories: Band-Selective and Channel-Selective

Features:

1,No more self-oscillation and easy to choose installation location

2,For Cable-Access type, pure BTS signal picked up by the Donor Unit will greatly reduce the signal noise

3,The Remote Unit can be installed out of the BTS coverage

4,A full 360-degree coverage can be achieved

5,No need to occupy frequency resource as the link frequency

Specification:

Type	KT- Outdoor/Indoor 3G WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier
Frequency	UL:1920~1980MHz DL:2110~2170MHz
Output Power	33dBm	37dBm		40dBm	43dBm
Gain	50-65dB
Gain Adjust Range	≥30dB;1dB/step
AGC Range	≥25dB
IMD3	≤-50dBc	≤-45dBc
Noise Figure	≤5dB
Ripple in Band	≤3dB
Time Delay	≤10μs
Spectrum mask	Meet ETSI specification
Spurious Emission	9KHz-1GHz:≤-36dBm/30KHz;1GHz-12.75GHz:≤-30dBm/30KHz
Port Impedance	50Ω
VSWR	≤1.5
Monitoring Mode	Local;Remote(Optional)
Power Supply	AC220V(Normal); AC110V or DC48V or Solar Powered(Optional)
Weight	21kgs	21kgs		26kgs	32kgs
Software			Standard
Local Monitoring			PC via USB Port
Remote Monitoring			Via SMS or GPRS Modem
Controlled Parameters			Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
Monitoring Parameters			Gain, Frequency, Repeater ON/OFF, Alarm Message.
Alarm Items			Repeater Failure, DC Failure, ALC Alarm, PLL Failure

12months

PRODUCT NAME :	10W High Output Power Outdoor/Indoor 3G UMTS/HSDPA WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier
MODEL :	KT-3G/B60-P10
PRODUCT CATEGORY :	3G UMTS/WCDMA Repeater
POWER SUPPLY :	AC 110V、AC 220V、DC-24V
FREQUENCY :	1920-1980MHz/2110~2170MHz
SCENARIOS :	Stadium、Office、Highway、Railway、Scenic、Pier、Rural、Suburban、Hospital、Campus、Mine、Oilfield、Tunnel
COVERAGE :	1-3km、3-5km、5-10km、>10km、1-5KM


E-mail:
Products:	UHF Tetra 400MHz Repeater Fiber Optic Signal Amplifier BDA widely used in trunking communication systems
Subject:
Message:
Quantity needed:
Verification: